Honey Hole Shrub Assembly Instructions

1. Helpful hint: Since no glue is required, the limbs are designed to have a bit of a tight fit. Dipping the end of the limbs into a bucket of soapy water will help them slide in easier.
2. Start by pushing the limbs into the drilled holes. You want the limbs to extend past the inside of the dome by about one inch.
3. Twist the limbs into a random pattern.
4. The weight is already attached in the center of the dome. If the habitat is going to be placed in an area with a current, you will need to attach additional weight.
5. Place the structures in the water using a boat or toss them in from the bank.
6. The Honey Hole Shrub will sink upright every time!

Download the complete assembly instructions for the Honey Hole Shrub. 

Learn more about Honey Hole Shrub and Tree