Fish Feeders
Having trouble with one of the Pond King Fish Feeders? This section has answers to common issues we’ve seen over the years.
Assembly Instructions
Other
Do you sell replacement parts for Pond King Fish Feeders?
Yes. If your feeder has an issue and you're needing a new part, we can help! Here's a list of…
Is there a wiring diagram for the Pond King Fish Feeders?
Yes. The wiring diagram will be the same for the Pond King Mounted or Floating fish feeder. The difference is…
How do I replace the fish feeder motor?
Tools Needed 5/16 Nut Driver or Wrench 11/32 Wrench 3/32 Allen Wrench Using a 5/16 wrench or nut driver remove…
There are 2 battery symbols on my timer. What do they mean?
The top battery symbol is for the internal AA batteries in the timer. These AA batteries are not necessary for…
My feeder is throwing too much feed. How do I adjust the throwplate?
There are 2 set-screws that need to be removed before adjusting the throwplate position. We use lock-tite when we put…
The solar panel on my fish feeder is kind of milky white. Does the sun still get through it to charge?
It’s possible it’s time to change out the solar panel. If you have a volt meter, you can pull the…
Timer
How do I set the clock on the timer?
Push Set Clock Push Hr & Min buttons to the correct time of day
How do I set the timer on the feeder?
There are instructions on the back of the timer walking you through these steps: TO SET FEED TIME: Push P1…
There are 2 battery symbols on my timer. What do they mean?
The top battery symbol is for the internal AA batteries in the timer. These AA batteries are not necessary for…
The timer is buzzing in my hand.
The main feeder battery may be bad. Change out the battery and it should fix the problem. If not, it…
The timer has a bunch of 8s on the screen.
The timer is faulty and needs to be replaced. If it’s within the 5 year warranty period, please contact us.…
I push the test button on the timer, and the red light comes on, but it doesn’t spin.
The red light always comes on while the motor is engaged. Reach down inside the feeder and check the throwplate/shaft…
The timer only shows a couple of little lines on the screen, and my feeder doesn’t work. I checked the battery and solar panel and everything is getting power.
Solution 1 Replace the AA batteries on the timer itself. Solution 2 Replace the timer. The timers have a 5…
I hit the test button and the feeder goes off, but it’s not going off at its programmed times.
Solution 1 Make sure the times are set correctly (am/pm) Solution 2 Change out the AA batteries on the timer.…
I hit the test button and nothing happens
Solution 1 Check to make sure all connections are good between battery and timer Solution 2 Reach in and see…
No matter what I set the timer at, the feeder is going off for 6 seconds.
Solution 1 You might be pushing the test button. The test run time is automatically programmed at 6 seconds. If…
Still have questions?
Whether you’re looking for information about shipping & delivery, product specs and details, or help with setting up an installment plan, our team is standing by and happy to assist.
