- Helpful hint: Since no glue is required, the limbs are designed to have a bit of a tight fit. Dipping the end of the limbs into a bucket of soapy water will help them slide in easier.
- Start by pushing the limbs into the drilled holes. You want the limbs to extend past the inside of the dome by about one inch.
- Twist the limbs into a random pattern.
- The weight is already attached in the center of the dome. If the habitat is going to be placed in an area with a current, you will need to attach additional weight.
- Place the structures in the water using a boat or toss them in from the bank.
- The Honey Hole Shrub will sink upright every time!
Download the complete assembly instructions for the Honey Hole Shrub.
