Mounted Fish Feeder Assembly Instructions
The fish feeder will come completely assembled, but you will have to install the battery and timer. You’ll receive detailed assembly instructions with your fish feeder, but it’s really pretty simple.
Fish Feeders
Having trouble with one of the Pond King Fish Feeders? This section has answers to common issues we've seen over the years.
Assembly Instructions
Timer
I push the test button on the timer, and the red light comes on, but it doesn’t spin.
The red light always comes on while the motor is engaged.
The timer has a bunch of 8s on the screen.
The timer is faulty and needs to be replaced. If it’s within the 5 year warranty period, please contact us. As long as it doesn’t have any signs of damage or misuse (water damage, corrosion, etc.), ...
No matter what I set the timer at, the feeder is going off for 6 seconds.
Solution 1 You might be pushing the test button. The test run time is automatically programmed at 6 seconds. If you set your program time for different times, the only way you’ll know that’s going ...
How do I set the clock on the timer?
Push Set Clock Push Hr & Min buttons to the correct time of day
The timer only shows a couple of little lines on the screen, and my feeder doesn’t work. I checked the battery and solar panel and everything is getting power.
Solution 1 Replace the AA batteries on the timer itself.
How do I set the timer on the feeder?
There are instructions on the back of the timer walking you through these steps:
The timer is buzzing in my hand.
The main feeder battery may be bad. Change out the battery and it should fix the problem.
I hit the test button and nothing happens
Solution 1 Check to make sure all connections are good between battery and timer
I hit the test button and the feeder goes off, but it’s not going off at its programmed times.
Solution 1 Make sure the times are set correctly (am/pm)
There are 2 battery symbols on my timer. What do they mean?
The top battery symbol is for the internal AA batteries in the timer. These AA batteries are not necessary for the timer to operate but only hold the memory when the timer is disconnected from the ...
Other
My feeder is throwing too much feed. How do I adjust the throwplate?
There are 2 set-screws that need to be removed before adjusting the throwplate position. We use lock-tite when we put the set screws in, so the throwplate may be “stuck” on the shaft even after the ...
The solar panel on my fish feeder is kind of milky white. Does the sun still get through it to charge?
It’s possible it’s time to change out the solar panel.
Is there a wiring diagram for the Pond King Fish Feeders?
Yes. The wiring diagram will be the same for the Pond King Mounted or Floating fish feeder. The difference is if your feeder has a remote or not.
How do I replace the fish feeder motor?
Tools Needed 5/16 Nut Driver or Wrench 11/32 Wrench 3/32 Allen Wrench Using a 5/16 wrench or nut driver remove the varmint guard clips and varmint guard Remove the 2 bolts on the throwplate using the ...
Do you sell replacement parts for Pond King Fish Feeders?
Yes. If your feeder has an issue and you’re needing a new part, we can help! Here’s a list of the different parts. Please contact us below to get current pricing and/or to order. We will need to know ...
Still have questions?
Whether you’re looking for information about shipping & delivery, product specs and details, or help with setting up an installment plan, our team is standing by and happy to assist.
